Trivac D 4B

TRIVAC B, Two-Stage Rotary Vane
The TRIVAC B is part of the well-prov- en TRIVAC concept

Description

HIGHLIGHTS

The TRIVAC B pumps with their com- prehensive range of accessories have proven themselves time and again as rugged pumps in many and varied applications .

The inner body is assembled from indi- vidual parts without sealing compo-nents . The parts are pinned in order to ensure easy disassembly and reas- sembly of the parts .

All pumps from the D 4 B to the D 25 B model are equipped either with single-phase or three-phase motors . D 40 – 65 B models are equipped with three-phase motors . In the TRIVAC B, the pump unit and the motor are linked by an elastic coupling .

The TRIVAC B range is a modular sys- tem which divides into three groups:
TRIVAC 4/8 Series
TRIVAC 16/25 Series
TRIVAC 40/65 Series

Nominal pumping speed m3/h (cfm)4 .8 (2 .8)
Pumping speed m3/h (cfm)4 .2 (2 .5)
Ultimate partial pressure without gas ballast  mbar (Torr)10-4 (≤ 0.75 x 10-4)
Ultimate total (pressure without gas ballast mbar (Torr)2 x 10-3 (≤ 1 .5 x 10-3)
Ultimate total (pressure with gas ballast Stage  mbar (Torr)5x 10-3 (≤ 0.75 x 10-3)
Oil filling, min . / max .l (qt)0.3 / 0.8 (0.3 / 0.85)
Noise level dB(A)50 / 52
Admissible ambient temperature°C (°F)+12 to +40
Motor ratingW (HP)370 (0 .50)
Nominal speedrpm370 (0 .50)
Type of protection IP1500
Weight (with oil filling)  kg (lbs)18 .7 (41 .2)
Connections (Intake and Exhaust) DN16 KF
Weight (with oil filling)  kg (lbs)18 .7 (41 .2)

All basic models (single-phase and three-phase motor) are certified in accordance with 2014/34/EU (ATEX)
High water vapor tolerance
Continuous operation even at 1000 mbar
Built-in oil pump; pressure- lubricated sliding bearings
All controls as well as the oil sight glass are located on the front face
Either vertical or horizontal intake and exhaust ports
Exchangeable inner body
Anti-suckback valve controlled via the oil pressure
Free of yellow metals
Service-friendly
Ideal as backing pump for medium and high vacuum applications, because of low oil backstreaming
Highly leaktight (4He-capable)

Power Voltage:1 pha 220 V, 50 -60 HZ
3 pha 380V-400V, 50-60Hz

Mass and X-ray spectrometers
Electron beam microscopes
Leak detectors
Sterilizers
Freeze-drying systems
Chemical and research labs
General vacuum engineering
Backing pump for high vacuum pump systems

TRIVAC B with 1-phase motor 230 V, 50 Hz
with dual voltage motor 110-115/210-230 V, 50/60 Hz
with 3-phase motor
200 – 240/380 – 400 V, 50 Hz /
200 – 240/380 – 480 V, 60 Hz 1)
219 − 242 V / 380 − 420 V, 50Hz,
ATEX Category 3 inside and 3 outside
II 3/3G EX h IIC T4 (50 Hz) Gc /
EX h IIC T3 (50 Hz) Gc (12°C ≤ Ta ≤ 40°C)

Dust filter
Adsorption trap
TK 4-8 cold trap
AF 4-8 exhaust filter
AR 4-8 exhaust filter with lubricant return
AK 4-8 condensate trap
OF 4-25 mechanical oil filter
CF 4-25 chemical oil filter
Connector for gas ballast inlet M 16 x 1 .5 – DN 16 KF
Oil drain tap M 16 x 1 .5

Inner body
Major maintenance kit (without oil)
Minor maintenance kit (without oil)
Shaft sealing replacement kit
Small parts kit
Seal kit

 

Additional information

Manufacturer

Leybold

Origin

Germany

You've just added this product to the cart: