Trivac D 65B
TRIVAC B, Two-Stage Rotary Vane
The TRIVAC B is part of the well-prov- en TRIVAC concept
- Description
- Additional information
Description
HIGHLIGHTS
The TRIVAC B pumps with their com- prehensive range of accessories have proven themselves time and again as rugged pumps in many and varied applications .
The inner body is assembled from indi- vidual parts without sealing compo-nents . The parts are pinned in order to ensure easy disassembly and reas- sembly of the parts .
All pumps from the D 4 B to the D 25 B model are equipped either with single-phase or three-phase motors . D 40 – 65 B models are equipped with three-phase motors . In the TRIVAC B, the pump unit and the motor are linked by an elastic coupling .
The TRIVAC B range is a modular sys- tem which divides into three groups:
TRIVAC 4/8 Series
TRIVAC 16/25 Series
TRIVAC 40/65 Series
| Nominal pumping speed m3/h (cfm) | 75 (44) |
| Pumping speed m3/h (cfm) | 65 (38) |
| Ultimate partial pressure without gas ballast mbar (Torr) | 10-4 (≤ 0.75 x 10-4) |
| Ultimate total (pressure without gas ballast mbar (Torr) | 2 x 10-3 (≤ 1 .5 x 10-3) |
| Ultimate total (pressure with gas ballast Stage mbar (Torr) | 5x 10-3 (≤ 0.75 x 10-3) |
| Oil filling, min . / max .l (qt) | 2 .0 / 3 .3 (2 .1 / 3 .5) |
| Noise level dB(A) | 57 / 59 |
| Admissible ambient temperature°C (°F) | +12 to +40 |
| Motor ratingW (HP) | 2200 |
| Nominal speedrpm | 1460 |
| Weight (with oil filling) kg (lbs) | 84 .5 (186 .3) |
| Connections (Intake and Exhaust) DN | 40 KF |
| Height x Width x Depth | |
| Weight (with oil filling) kg (lbs) | 84 .5 (186 .3) |
All basic models (single-phase and three-phase motor) are certified in accordance with 2014/34/EU (ATEX)
High water vapor tolerance
Continuous operation even at 1000 mbar
Built-in oil pump; pressure- lubricated sliding bearings
All controls as well as the oil sight glass are located on the front face
Either vertical or horizontal intake and exhaust ports
Exchangeable inner body
Anti-suckback valve controlled via the oil pressure
Free of yellow metals
Service-friendly
Ideal as backing pump for medium and high vacuum applications, because of low oil backstreaming
Highly leaktight (4He-capable)
| Power Voltage: | 1 pha 220 V, 50 -60 HZ 3 pha 380V-400V, 50-60Hz |
Mass and X-ray spectrometers
Electron beam microscopes
Leak detectors
Sterilizers
Freeze-drying systems
Chemical and research labs
General vacuum engineering
Backing pump for high vacuum pump systems
TRIVAC B with 1-phase motor 230 V, 50 Hz
with dual voltage motor 110-115/210-230 V, 50/60 Hz
with 3-phase motor
200 – 240/380 – 400 V, 50 Hz /
200 – 240/380 – 480 V, 60 Hz 1)
219 − 242 V / 380 − 420 V, 50Hz,
ATEX Category 3 inside and 3 outside
II 3/3G EX h IIC T4 (50 Hz) Gc /
EX h IIC T3 (50 Hz) Gc (12°C ≤ Ta ≤ 40°C)
Dust filter
Adsorption trap
TK 4-8 cold trap
AF 4-8 exhaust filter
AR 4-8 exhaust filter with lubricant return
AK 4-8 condensate trap
OF 4-25 mechanical oil filter
CF 4-25 chemical oil filter
Connector for gas ballast inlet M 16 x 1 .5 – DN 16 KF
Oil drain tap M 16 x 1 .5
Inner body
Major maintenance kit (without oil)
Minor maintenance kit (without oil)
Shaft sealing replacement kit
Small parts kit
Seal kit
Additional information
| Manufacturer | Leybold |
|---|---|
| Origin | Germany |
