Fast-Firing Furnaces up to 1300 °C
Fast-firing furnaces are ideal for simulation of typical fast-firing processes up to a maximum firing temperature of 1300 °C. The combination of high performance, low thermal mass and powerful cooling fans.
- Description
- Additional information
Description
HIGHLIGHTS
Temprature max up to 1300 °C
Ceramic grid tubes as charge support
Rapid switching cycles result in precise temperature control
– Temprature max °C: | |
+ Model: LS 12/13: | 1300°C |
+ Model LS 25/13: | 1300°C |
– Inner dimensions (W×D×H mm): | |
+ Model: LS 12/13: | 350× 350× 40 |
+ Model LS 25/13: | 500 × 500× 100 |
– Volume: | |
+ Model: LS 12/13: | 12 L |
+ Model LS 25/13: | 25 L |
– Outer dimensions (W×D×H mm): | |
+ Model: LS 12/13: | 750× 880 ×1090 |
+ Model LS 25/13: | 900× 1030× 1150 |
– Connected load: | |
+ Model: LS 12/13: | 15 kW |
+ Model LS 25/13: | 22 kW |
– Electrical connection: | 3 phase |
– Weight: | |
+ Model: LS 12/13: | 150 lg |
+ Model LS 25/13: | 160 kg |
Standard Equipment
– Temprature max up to 1300 °C
– Ceramic grid tubes as charge support
– Floor and lid heating, two-zone control
– Special arrangement of the heating elements for optimum temperature uniformity
– Rapid switching cycles result in precise temperature control
– Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
– Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP)
– Integrated cooling fans, programmable to speed up charge cooling including housing cooling
– Programmable lid opening of approximately 60 mm for faster cooling without activating the fan
– Thermocouple type S for top and bottom zone
– Castors for easy furnace moving
– Defined application within the constraints of the operating instructions
– NTLog Basic for Nabertherm controller: recording of process data with – USB-flash drive
– Controller P470 (50 programs with each 40 segments)
– Connected load: | |
+ Model: LS 12/13: | 15 kW |
+ Model LS 25/13: | 22 kW |
– Electrical connection: | 3 phase |
– Weight: | |
+ Model: LS 12/13: | 150 kg |
+ Model LS 25/13: | 160 kg |
fast-firing furnaces are ideal for simulation of typical fast-firing processes up to a maximum firing temperature of 1300 °C
updating…
updating…
Additional information
Manufacturer | Nabertherm |
---|---|
Origin | Germany |
Type | Manual |