Tube Furnaces with Stand for Horizontal and Vertical Operation up to 1500 °C
The compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, and their compact design.
- Description
- Additional information
Description
HIGHLIGHTS
Temprature max 1100 °C, 1300 °C, or 1500 °C
Ceramic working tube C 530 including two fiber plugs for operation under air
Controller B410 (5 programs with each 4 segments)
| Temprature max (°C): | |
| + Model RT 50/250/11: | 1100°C |
| + Model RT 50/250/13: | 1300°C |
| + Model RT 30/200/15: | 1500 °C |
| Outer dimensions (W×D×H mm): | |
| + Model RT 50/250/11: | 350× 380 ×740 mm |
| + Model RT 50/250/13: | 350 × 380 × 740 mm |
| + Model RT 30/200/15: | 445× 475 × 740 mm |
| Inner tube Ø: | 50 mm |
| Heated length: | 250 mm |
| Length constant temperature +/− 5 K: | |
| + Model RT 50/250/11: | 80 mm |
| + Model RT 50/250/13: | 80 mm |
| + Model RT 30/200/15: | 70 mm |
| Tube length: | 360 mm |
| Connected load: | 1.8 kW |
| Electrical connection: | 1-phase |
| Weight: | |
| + Model RT 50/250/11: | 25 kg |
| + Model RT 50/250/13: | 25 kg |
| + Model RT 30/200/15: | 45 kg |
– Temprature max 1100 °C, 1300 °C, or 1500 °C
– Compact design
– Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
– Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP)
– Vertical or horizontal operation infinitely adjustable
– Angle infinitely adjustable from 0 to 90
– Working height infinitely adjustable
– Operation also possible without stand if safety guidelines are observed
– Ceramic working tube C 530 including two fiber plugs for operation under air
– Type S thermocouple
– Solid state relays provide for lownoise operation
– Heating wires wound directly around the working tube resulting in very fast heat-up rates
– Control system integrated in furnace base
– Defined application within the constraints of the operating instructions
– NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
– Controller B410 (5 programs with each 4 segments)
| Connected load: | 1.8 kW |
| Electrical connection: | 1-phase |
| Weight: | |
| + Model RT 50/250/11: | 25 kg |
| + Model RT 50/250/13: | 25 kg |
| + Model RT 30/200/15: | 45 kg |
The compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles.
updating…
updating…
Additional information
| Manufacturer | Nabertherm |
|---|---|
| Origin | Germany |
| Type | Manual |
