Aerosol monitor

Handheld monitor is a multi-channel, battery-operated, data-logging, light-scattering laser photometer that gives you real-time aerosol mass readings.
It uses a sheath air system that isolates the aerosol in the optics chamber to keep the optics clean for improved reliability and low maintenance.
It is suitable for clean office settings as well as harsh industrial workplaces, construction and environmental sites, and other outdoor applications. The aerosol handheld monitor measures aerosol contaminants such as dust, smoke, fumes and mists.
Aerosol concentration range 0.001 to 150 mg/m3.
Particle Size Range 0.1 to 15 µm.

Description

HIGHLIGHTS

Only the Aerosol Monitor can simultaneously measure both mass and size fraction.

Long life internal pump for continuous sampling.

Single-point data collection for walk through surveys.

Lightweight design with ergonomic handle for portable applications.

Sensor Type90° light scattering
Particle Size Range0.1 to 15 µm
Aerosol Concentration Range0.001 to 150 mg/m3
DisplaySize Segregated Mass Fractions for PM1, PM2.5, Respirable, PM10 and Total. All displayed
Resolution±0.1% of reading or 0.001 mg/m3, whichever is greater
Zero Stability±0.002 mg/m3 per 24 hours at 10 sec time constant
Flow Rate3.0 L/min
Flow Accuracy±5% of factory set point, internal flow controlled
Temperature Coefficient+0.001 mg/m3 per °C
Time ConstantUser adjustable, 1 to 60 seconds
Data Logging5 MB of on-board memory (>60,000 data points) 45 days at 1 minute logging interval
Log IntervalUser adjustable, 1 second to 1 hour
CommunicationsUSB (host and device). Stored data accessible using flash memory drive
Alarm OutAudible buzzer
Screen3.5 in. VGA color touchscreen
CE RatingImmunity/Emissions: EN61236-1:2006
Physical Size (H x W x D)4.9 x 4.8 x 12.5 in. (12.5 x 12.1 x 31.6 cm)
Weight2.9 lb (1.3 kg),
3.3 lb (1.5 kg) with battery

Simultaneously measure size-segregated mass fraction concentrations corresponding to PM1, PM2.5, respirable, PM10 and PM Total size fractions.
Lightweight and portable
Manual and programmable data logging functions.
Single point data logging capability.
Handheld unit.
Aerosol concentration range 0.001 to 150 mg/m3.
Li-Ion rechargeable batteries.
Internal and external battery charging capabilities.
Outlet port for isokinetic sampling applications.
User serviceable sheath flow and pump filters.
Logged test pause and restart feature.
Logged test programming.
+ Color touch screen—either manual mode or program mode.
+ TRAKPRO™ Data Analysis Software via a PC.
User adjustable custom calibration settings.
Instantaneous alarm settings with visual and audible warnings.
Real-time graph display.
View statistical information during and after sampling.
On-screen instrument status indicators: FLOW, LASER and FILTER.
Filter service indicator for user preventative maintenance.
Single-point data collection for walk through surveys.
Long life internal pump.
Power supplySwitching AC power adapter with universal line cord included, 115–240 VAC
Operational Temp32 to 120°F (0 to 50°C)
Storage Temp-4 to 140°F (-20 to 60°C)
Operational Humidity0 to 95% RH, non-condensing
Industrial/occupational hygiene surveys
Indoor air quality investigations
Point source location monitoring
Point source location monitoring
Engineering control evaluations
Battery charger
Battery3600 Mah li-ion
Carrying case
Dorr oliver cyclone (10-mm) with clip
Filter removal tool
Impactor oil
Inlet capQuantity: 2
Internal filter kit
Standard calibration kit
Trakpro data analysis software
Tubing, conductive 3ft1m
Usb computer cable
Zero filter
Auto zeroing module
Heated inlet sample conditioner (for use with an environmental enclosure)
Cloud Data Management System as hosted by Netronix™

TRAKPRO™ Software
TRAKPROTM Data Analysis Software is an instrument control and data acquisition program for a range of monitoring equipment manufactured by Incorporated. Since the functionality of the instruments varies with model type, the software should be configured for the required instrument before use. This may be done by the Software Configure option. The software provides the facility for setting up the instruments, programming in measuring sequences, reading and saving the resulting test data to a file, and displaying the results graphically and in tables. Statistics are available on discrete test data and graphical data and all results can be sent to a printer.
FEATURES:
+ Display data in color or black and white, in tabular or graphical form
+ Combine multiple data sets into a single graph for comparison
+ Define and upload data logging protocols for unattended Q-Trak, SidePak, DustTrak, AeroTrak, or P-Trak monitor operation
+ Enter and upload calibration factors for the DustTrak and SidePak AM510 monitors
+ Create template files and merge with SidePak Sampling Pump history files to create detailed reports
+ Export data to other software.

Additional information

Type

Semiautomatic

You've just added this product to the cart: