Magnetic stirrer Agimatic-N with heating
Unique functional design, with epoxy covered alloy case. Choice of stainless steel or ceramic top plate (model dependent). An internal case acts as a spill guard and insulator, made from AISI304 stainless steel. Tilted control panel for easy viewing with splash protection.
Electronic speed control from 60 to 1600 r.p.m. Easy to service and to replace modular electronics. All heated models have a connection at the back to connect an electronic contact thermometer “Sensoterm ll”, electronic controller “Electemp-TFT” or Pt100 temperature probe, model dependent.
- Additional information
Electronic control of speed and power to the heater.
|Speeds||From 60 to 1600 rpm|
|Maximum stir volume||10 litres|
with renovable safety ring against spillage
1. Switch on button with indicator lamp for heating and
for stirring speed.
2. Electronic stir speed control.
3. Electronic heater energy control from 0-100%,
synchronised with an indicator lamp that functions
when the plate is hot.
4. Illuminated indicator when the heater is “on”
|Power Supply||Single phase 230V ±10% 50 Hz.|
Three phase 230/400V ± 10% 50 Hz.
Single phase 110V ±10% 60 Hz. (on demand).
Electronic contact thermometer “Sensoterm ll”
Temperature range from: -50 °C to +300 °C.
Temperature sensor : 3.5 Ø x 250 mm immersion.
Stability: 1 °C ±1 digit
Resolution: 1 °C.
Temperature display: LCD 8 mm.
Working environment: 0 to 60 °C and relative humidity
Dimensions: 130 high x 71 wide x 24 mm deep ( wi-
Clamp with bosshead
For Ø from 0 to 25mm
Support rod with thread
12 mm Ø x 500 mm high