Compact Digestion System – MBCM-12
MBC Series block digesters are available in 6 different models with different amount of sample positions and tube sizes to process from 6 up to 40 samples at a time. The system is composed of a heating block, a mobile samples tubes rack and a mobile fumes collector.
+ Vertically assembled and mobile sample tubes rack and fumes collector for a faster cooling and minimum footprint.
+ Heating block with extensive thermal insulation by rock wool and ceramic fiber and covered with Halar® resin coating.
+ Easy-to-clean and corrosion resistant fumes collector and external frame made of AISI-304.
Safety thermostat to prevent overheating.
Contains calibration port for external probes.
- Description
- Additional information
Description
HIGHLIGHTS
Built-in temperature regulator, has 9 programs with 18 temperature and time segments each.
Programmable auto-start.
Reference | MBCM-12 |
Power W | 1500 |
Sample positions | 12 |
Compatible sample tubes ml | 100 |
Temperature stability at 400ºC | ±1 |
Adjustable temperature ºC | 45 – 450 |
Homegeneity at 420ºC | ±5 |
External dimensions L x D x H mm | 350x400x635 |
Weight Kg | 30 |
MBC digesters are versatile for a wide range of applications and samples, even fatty, inhomogeneous and highly foaming samples are compatible with the equipment. | |
Delay time, ramps, digestion temperatures and digestion times can be adjusted according to each analysis requirements. It has a total of 9 programs available that can be saved and edited at any time. | |
Temperature is homogenously distributed throughout the metal heating block, ensuring that all samples work under exactly the same conditions, achieving a high reproducibility among the most common applications. | |
In the event of a equipment failure, a message on the screen indicates the cause and, if appropriate, digestion is automatically stopped. Temperature control is supported by a safety thermostat to avoid overheating. | |
There are 6 different models available depending on sample tube size and number of sample positions. | |
Digestion tubes rack, back support, antidrip tray, fumes collector and heating block cover made of AISI-304, with the latter covered with Halar® coating. Heating block made of aluminum. Rock wool and ceramic fiber are used for thermal insulation. | |
The equipment is designed to occupy as little space as possible following a fully integrated and vertical assembly of the equipment parts to minimize the equipment footprint. | |
The equipment has a support to place the mobile samples tubes rack away from the heating block for a faster cooling, avoiding long waiting times before performing the final analysis of the digested sample. | |
The exhaust fumes collector has improved characteristics to guarantee that the vapors that come out of each sample tube are properly collected and directed to the Fumes Neutralization Unit (Scrubber). |
Voltage V | 230/115 |
Frequency Hz | 50/60 |
FOOD, FEED & BEVERAGES
Nitrogen, Protein, Fat hydrolysis.
ENVIRONMENTAL ANALYSIS
Nitrogen, Chemical Oxygen Demand, Heavy metal traces.
PHARMACEUTICAL INDUSTRY
Protein, Organic nitrogen, Ammonia, Urea, Formaldehyde.
CHEMICAL INDUSTRY
Organic nitrogen
MB and MMB – Programmable heating block
GP-N and GPM – Tubes rack with support
EG-N – Fumes collector with support
SPD – Fumes collector with support
TB42300 – Digestion tube
+ Sample vol. ml | 250 |
+ Material | glass |
+ Dimensions Ø x H mm | 42 x 300 |
+ Compatible maximum number of sample tubes per mode | 6 |
TB42300E – Reinforced digestion tube
+ Sample vol. ml | 250 |
+ Material | reinforced glass |
+ Dimensions Ø x H mm | 42 x 300 |
+ Compatible maximum number of sample tubes per mode | 6 |
Fumes neutralization unit- Scrubber
+ Power W | 100 |
+ Voltage V | 230/115 |
+ Frequency Hz | 50/60 |
+ External dimensions L x D x H mm | 520x373x310 |
+ Weight Kg | 13 |
+ Environment conditions | Temperature between 5ºC and 40ºC Humidity between 30% and 80% |
Updating…
Additional information
Manufacturer | Raypa |
---|---|
Origin | Spain |
Type | Semiautomatic |