SURFCOM TOUCH 50
High-level compact-type model in the SURFCOM TOUCH series with high resolution and straightness
The skidless measurement-type with a high performing pick-up having high resolution and wide range. Various types of workpieces can be measured by changing the stylus for deep, long, or small holes or round surface.
- Description
- Additional information
Description
HIGHLIGHTS
High-precision and compact tracing driver
– The tracing driver is characterised by a high guide accuracy of 0.3 μm / 50 mm
| Measurement range: | |
| – Z direction: | ±500 μm |
| – Drive axis: | 50 mm |
| Tracing driver | |
| – Evaluation length | 0.1 to 50 mm |
| – Straightness accuracy | 0.3 μm/50 mm |
| – Detector vertical movement volume | 50 mm |
| – Measurement Speed | 0.15, 0.3, 0.6, 1.5, 3 / 0.05, 0.1, 0.2, 0.5, 1 mm/s (switching) |
| Pick-up | |
| – Sensing type: | Differential inductance |
| – Measurement method: | Skidless/Skid (optional) |
| – Z direction resolution: | 0.0001 μm/±40 μm, 0.00125 μm/±500 μm |
| Analysis item | |
| – Calculation standards | Comply with JIS2013/2001, JIS1994, JIS1982, ISO1997/2009, ISO13565, DIN1990, ASME2002/2009, ASME1995, CNOMO |
| – Profile curve | Pa, Pq, Pp, Pv, Pc, PSm, PΔq, PPc, Psk, Pku, Pt, Pmr(c), Pmr, Pδc, Rz82, TILTA, AVH, Hmax, Hmin, AREA, ‘Rmax, Rz, Sm, Δa, Δq, λa, λq, Lr, Rsk, Rku, Rk, Rpk, Rvk, Mr1, Mr2, Vo, K, tp, tp2, Hp |
| – Roughness curve: | Profile curve, roughness curve, ISO13565 special roughness curve, roughness motif curve, waviness motif curve, upper envelope waviness curve |
| Filter | |
| – Filter type: | Gaussian, 2RC (phase compensation), 2RC (non-phase compensation) |
| Amplifier | |
| – Display: | 7-inch colour liquid crystal touch panel |
| – Data output: | USB connectors for USB memory : x 2 (model without printer), x 1 (model with printer), Micro USB connector for USB communication x 1 |
| Power supply | |
| – Charging: | Built-in battery (to be charged using AC adaptor), charging period: 3 hours (about 600 measurements can be take when fully charged) |
| – Power supply: | AC100 to 240 V ±10%, 50/60 Hz, single phase |
| – External dimensions | (W x D x H)/Weight: Printer-equipped model: Amplifier: 320 x 167 x 44 mm/about 2 kg for the entire system. ‘Models without printer: Amplifier: 252 x 167 x 44 mm/about 1.6 kg for the entire system |
Extended Z-axis measurement range from 800 to 1,000 μm (25% increase)
A compact high performing tracing driver
A handy-type driver can be attached
| – Power supply: | AC100 to 240 V ±10%, 50/60 Hz, single phase |
| – Power consumption: | Maximum 80VA |
The large Z measuring range of the probe system enables flat as well as oblique and round surfaces to be measured and saves considerable time and effort to alignment of the workpieces.
Deep measuring positions can be easily reached and even the smallest holes measured thanks to a wide range of compatible probe arms. These can be changed quickly and easily with a probe-arm spring clamp, without the need for tools. An additional measuring stand can be used for tall workpieces
Compact measurement stand for measuring high workpieces or measuring with jigs.
Roll footing
Compact measurement stand
Updating…
Additional information
| Manufacturer | Accretech |
|---|---|
| Origin | Japan |
| Type | Manual |
