Máy nghiền mẫu phân tích
Process type: batch
Operating principle: cutting/impact
Batch mill for 2 different grinding procedures:
+ Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater. This beater can be used for a Mohs hardness up to 6 (incl. with delivery)
+ Cutting grinding for pulverizing soft, fibrous materials with a cutting blade (not incl. with delivery).
Moist and/or sticky materials can be pulverized by adding water.
- Mô tả
- Thông tin bổ sung
Mô tả
HIGHLIGHTS
High-grade stainless steel beater
This beater can be used for a Mohs hardness up to 6
| Motor rating input | 160 W |
| Motor rating output | 100 W |
| Speed max. | 28000 rpm |
| Circumferential speed max. | 53 m/s |
| Usable volume max. | 80 ml |
| Feed hardness max. | 6 Mohs |
| Feed grain size max. | 10 mm |
| Material beater/cutter | stainless steel 1.4034 |
| Material milling chamber | stainless steel 1.4571 |
| Power-on time ON | 1 min |
| Power-om time OFF | 10 min |
| Mill feed can be cooled in milling chamber with dry ice | yes |
| Mill feed can be cooled in milling chamber with liquid nitrogen | yes |
| Permissible ambient temperature | 5-40 °C |
| Permissible relative moisture | 80% |
| Protection class according to DIN EN 60529 | IP 43 |
| Power input | 160 W |
| Dimensions (W x H x D) | 85 x 240 x 85 mm |
| Weight | 1,5 kg |
Grinding chamber made of Tefcel (PTFE, glass fiber-reinforced) with stainless steel inlet (1.4571), useful volume 80 ml (incl. with delivery). For embrittlement of grinding materials with liquid nitrogen in the grinding chamber
| Supply power | 220 – 230 / 100 – 115 V |
| Frequency | 50/60 Hz |
The grinding of solid samples is essential to ensure precise analysis. It is important that the grinding leads to the homogeneity and desired fineness of the sample
The type of mill to be used depends on the properties of the substance and the quantity of the sample. For example, brittle materials are ground with a beater, fibrous materials with a blade, and hard/brittle materials are ground with a special hard metal cutter
Small sample quantities are generally ground with a batch mill. Here, the samples are ground very smoothly and a particle size spectrum of the ground material can be expected. Larger quantities can be ground with an inline mill. Here, the sample passes through a sieve, which leads to the ground material achieving a defined particle size
Grinding chamber
Made of polyamide with stainless steel inlet (AlSl 316L)
Useful volume: 250 ml
Spare beater
Material: stainl. steel (AISI 420)
For use up to Mohs hardness 6
Cutting blade
Material: stainless. steel (AISI 440B)
Beater
Material: Stainless steel coated with chromium carbide
FFor use up to Mohs hardness 9
Spare grinding chamber
Made of Tefcel (ETFE, glass fibre-reinforced) with stainless steel inlet (AISI 316L)
Useful volume: 80 ml
Funnel
Material jacket: PTFE
Material sieve: stainl. steel (AISI 316L)
Double beater
For use up to Mohs hardness 3
Material: titanium, surface-hardened
Grinding chamber
Volume: 250 ml
Updating…
Thông tin bổ sung
| Hãng sản xuất | IKA |
|---|---|
| Xuất xứ | Đức |
| Loại | Thủ công |